Fab Fours PREMIUM FRONT

Off-roading has taken the country by storm since Jeeps were introduced to the civilian market after World War II.

As comfortable and versatile off-road vehicles were produced to reach a wider audience, a passion for off-roading as a hobby skyrocketed.

Fab Fours meets that need; we manufacture some of the world’s best bumpers and understand that strength and quality craftsmanship are every bit as important as style. For remarkable, hand-crafted bumpers made in America!

Provides far more tire clearance

Winch Ready – Accepts up to 16,500 lb. winches or smaller

1″ D-Ring mounts

2-piece mounting system with adjustability to allow a “custom” fit

Fab Fours signature injection molded light housings

*Fab Fours’ LED 90mm fog and 60mm turn indicator lights are included FREE with the bumper (2003-2019)

Sensors may read shackles or hooks protruding from the fairlead.

All sensor testing is done on lifted trucks

Stubby design For Maximum Tire Clearance

Winch Ready

Winch Tray Included

Integrated D-Rings and Tow Hooks

Integrated Fog Light Housing- Retain **factory fog** lights or 3″X3″ Pod Lights (Recommend Rigid Industries)

Simple and Quick Installation

Overall design and fit is “High and Tight” to the contours of the vehicle.

Lower cutout to provide increased airflow.

Provides far greater tire clearance

Complete bolt-on front bumper w/ provided brackets that tie directly to the frame.

Sensor compatible

Allows for an integrated 20 inch Rigid Industries LED light bar in the center (light bar not included)

Mounting options on each side for (2) 3×3 Dually lights to give you maximum LED light coverage.

Sensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care.

Aggressive Design

Angry Eye Headlight Cutouts

Winch ready for Warn Zeon 10

Includes 4 removable inserts for optimal customization

Combines both Grille and Bumper

Provides Greater Tire Clearance

Simple and Quick Installation

*Integrated Crash Bar Cover on Full Width Design

Aggressive Design

Combines both Grille and Bumper

Winch ready for Warn Zeon 12 or smaller

9 removable inserts for optimal customization

Side mounting slots and tabs for various light options (lights not included).

* Accommodates (2) 3×3 cubes per side

Provides far more tire clearance.

Lower skid plate cutouts for increased airflow.

Integrated sensor holes

Accommodates front camera option on 2019-2020 mode

Be prepared for products that will change the way you and others look at your truck. Drawing from 30 years experience in the aftermarket and Original Equipment industry, Iron Cross is able to bring you the highest quality parts available using state of the art technology combined with old fashioned hard work. Iron Cross prides itself as one of the only remaining 100% American made manufacturers of automotive accessories.

Front:

∙ Sensor Compatible
∙ Bolt on plates
∙ Numerous light options
∙ Matte black finish with flat black plates
∙ Available in primer coat
∙ Aggressive design maintains a lower         profile look

Back:

∙ Sensor Compatible
∙ Bolt on plates
∙ Built in side step
∙ Matte black finish with flat black plates
∙ Available in primer coat
∙ Backup cube light option

*Light kits sold separately

Heavy Duty Base Front  -HD20 Series

Heavy Duty Push Bar Front -HD22 Series

Heavy Duty Grill Guard Front -HD24 Series

∙ All Iron Cross Automotive bumpers are CNC laser cut, fully welded for superior strength, and Made in America!

∙ Textured Matte Black finish

∙ Recessed 3.75" light housing for lights

∙ CNC laser cut

∙ Standard winch mount

∙ Available in Matte, Gloss and Primer finish

*Light kits sold separately

All Iron Cross Automotive bumpers are CNC laser cut, fully welded for superior strength, and Made in America!
∙ Matte Black powder coat finish ∙ Heavy Duty design
∙ CNC laser cut
∙ 3/4" D-Lugs
∙ Available in matte and gloss finish 

 ∙ Designed to fit like OEM
∙ 3/4" D-Lugs for Iron Cross Shackles
∙ 5.5" Rectangle Fog Light cut outs
∙ Slim Styling profile
∙ Center Light mounting options
∙ 20" - 22" center light bar
∙ 10 Gauge steel bumper shell with 1/4" mounting brackets
∙ Available in Gloss, Primer Finish and Matte Black 

*Light kits sold separately

 ∙ Sleek, Low Profile design
∙ 10 Gauge stell bumper shell with 1/4" mounting brackets
∙ 2" Square Class III Receiver tube with1/2' reinforced collar
∙ Flip down license plate available 

*Light kits sold separately

∙ Matte Black Textured Powder Coating

∙ (Also available in Primer Coat)

∙ All Front Bumpers Winch Compatible

∙ Front /Rear Bumpers have D-Lug Plates for Shackles

∙ Light Cut out for Iron Cross 3.75" Light (ICOP3R-ICKit)
  or factory fog lights

∙ JL Front Bumpers light cut out for Iron Cross 12" Light Bar (GP-12LED)

* JL bumpers will fit 2018 JK model Jeeps.

∙ Matte Black Textured Powder Coating

∙ (Also available in Primer Coat)

∙ All Front Bumpers Winch Compatible

∙ Front /Rear Bumpers have D-Lug Plates for Shackles

∙ Light Cut out for Iron Cross 3.75" Light (ICOP3R-ICKit)   or factory fog lights

∙ JL Front Bumpers light cut out for Iron Cross 12" Light Bar (GP-12LED)  

* JL bumpers will fit 2018 JK model Jeeps.

∙ Matte Black Textured Powder Coating

∙ (Also available in Primer Coat)

∙ All Front Bumpers Winch Compatible

∙ Front /Rear Bumpers have D-Lug Plates for Shackles

∙ Light Cut out for Iron Cross 3.75" Light (ICOP3R-ICKit)   or factory fog lights

∙ JL Front Bumpers light cut out for Iron Cross 12" Light Bar (GP-12LED)  

* JL bumpers will fit 2018 JK model Jeeps.

∙ Matte Black Textured Powder Coating

∙ (Also available in Primer Coat)

∙ All Front Bumpers Winch Compatible

∙ Front /Rear Bumpers have D-Lug Plates for Shackles

∙ Light Cut out for Iron Cross 3.75" Light (ICOP3R-ICKit)   or factory fog lights

∙ JL Front Bumpers light cut out for Iron Cross 12" Light Bar (GP-12LED)  

* JL bumpers will fit 2018 JK model Jeeps.

∙ Matte Black Textured Powder Coating

∙ (Also available in Primer Coat)

∙ All Front Bumpers Winch Compatible

∙ Front /Rear Bumpers have D-Lug Plates for Shackles

∙ Light Cut out for Iron Cross 3.75" Light (ICOP3R-ICKit)   or factory fog lights

∙ JL Front Bumpers light cut out for Iron Cross 12" Light Bar (GP-12LED)  

* JL bumpers will fit 2018 JK model Jeeps.

∙ Matte Black Textured Powder Coating

∙ (Also available in Primer Coat)

∙ All Front Bumpers Winch Compatible

∙ Front /Rear Bumpers have D-Lug Plates for Shackles

∙ Light Cut out for Iron Cross 3.75" Light (ICOP3R-ICKit)   or factory fog lights

∙ JL Front Bumpers light cut out for Iron Cross 12" Light Bar (GP-12LED)  

* JL bumpers will fit 2018 JK model Jeeps.

When you want the ultimate bumpers for your truck, you want the Go Rhino Bumper Replacements that are designed in 3D utilizing digitized data to form fit the contours of each vehicle. 

• One-piece welded winch tray built from 1/4" thick steel for use with winches up to 12,500 lbs
•  Framed mesh vent cover hides the mounting bracket while allowing critical airflow to the vehicle
•  Functional, removable steel mesh covers add protection and increased airflow to the winch
•  Different license plate mounting locations available with included bracket.
  1" thick steel D-shackle mounting clevis welded directly to the winch tray (Shackles not included)
• Optional Light Bar mount provides extra protection and multiple lighting options
• Optional Front Light Plate accessory allows for the installation of Rigid D-Series Dually or compatible LED lights 

• Models equipped with a factory rear hitch will require modification
• Not compatible with Blind Spot Monitor (BSM) & Rear Cross-Traffic Alert (RCTA)
• Integrated steps allow easier access to the truck bed
• Integrated D-shackle mounts (Shackles not included)
• Provisions for license plate lights
• Provisions for trailer light plug
• Port to allow access to spare tire crank
• Reverse sensor mounting port
• Optional Rear Light Plate accessory allows for the installation of Rigid D-Series Dually or compatible LED lights

Whether you’re protecting your grille from potential roadway hazards or pushing through construction site trash, a formidable front bumper is an absolute must. Upgrade your front end with the Dee Zee K-Series Bumper, the perfect way to add form and function. Custom fit for the specific year, make and model of your truck, these bumpers boast one-piece construction made from heavy duty steel that pairs strength with style. It is an accessory that will last the life of your investment. 

• Front Bumper Features One-Piece Construction from Heavy Duty Steel for Serious Strength
• Two Stage Finish of E-Coated and then Textured Black NRT™ to Inhibit Corrosion
• Custom Fit by Application
• Winch Plate with 1" thick Shackle Mounts for Heavy Duty Models (up to 16,500 lb. winch)
• Cutouts for extra LED Lighting (lights not included)
• No Drilling, Welding, or Cutting Necessary
• Not Designed for use with Proximity Sensors or Laser Speed Control Sensors, etc.
• Limited Lifetime on Manufacturing, 1-year on Black Powder Coat Finish
• Made in the USA

• Front Bumper Features One-Piece Construction from Heavy Duty Steel for Serious Strength
• Two Stage Finish of E-Coated and then Textured Black NRT™ to Inhibit Corrosion
• Custom Fit by Application
• Winch Plate with 1" thick Shackle Mounts for Heavy Duty Models (up to 16,500 lb. winch)
• Cutouts for extra LED Lighting (lights not included)
• No Drilling, Welding, or Cutting Necessary
• Not Designed for use with Proximity Sensors or Laser Speed Control Sensors, etc.
• Limited Lifetime on Manufacturing, 1-year on Black Powder Coat Finish
• Made in the USA

• Rear Bumper Features One-Piece Construction from Heavy Duty Steel for Serious Strength
• Two Stage Finish of E-Coated and then Textured Black NRT™ to Inhibit Corrosion
• Integrated Cutout for Use as Step
• Custom Fit by Application
• Pair with Dee Zee Front Bumper for the Complete Package
• Cutouts for extra LED Lighting (lights not included)
• No Drilling, Welding, or Cutting Necessary
• Not Designed for use with Proximity Sensors or Laser Speed Control Sensors, etc.
• Limited Lifetime on Manufacturing, 1-year on Black Powder Coat Finish
• Made in the USA

• Winch Plate Supports up to a 16,500 lb. winch
• Two Stage Finish of E-Coated and then Textured Black NRT™ to Inhibit Corrosion
• Includes All Mounting Hardware – Easy Hassle Free Installation
• 1” Thick Shackle Mounts for Heavy Duty Models
• Limited Lifetime Warranty on Manufacturing, 1-year Warranty on Black Powder Coat Finish
• Made in the USA

• Winch Plate Supports up to a 16,500 lb. winch
• Two Stage Finish of E-Coated and then Textured Black NRT™ to Inhibit Corrosion
• Includes All Mounting Hardware – Easy Hassle Free Installation
• 1” Thick Shackle Mounts for Heavy Duty Models
• Limited Lifetime Warranty on Manufacturing, 1-year Warranty on Black Powder Coat Finish
• Made in the USA

N-FAB offers both front and rear bumpers to meet your style needs.  N-FAB front bumpers are designed to allow for multiple light mount configurations, skid plates, or a winch.  The rear bumpers come in pre-runner or heavy duty styles. Whether you are looking for style, protection or both, N-FAB has a bumper for you! 

• Pre-Runner radius style for a clean, aggressive look
• 1-piece fully welded design using 1.75" .095 wall tubing
• Bolt onto factory bumper mounts for easy installation
• Brushed aluminum lower skid plate included
• Standard gloss black or textured black powder coating, using N-FAB's 3-stage powder coating process

• Allows retention of factory hitch
• Constructed of 1.75" .095 wall tubing for strength and durability
• Brushed aluminum skid plate included
• License plate mounting location
• Standard gloss black or textured black powder coating, using N-FAB's 3-stage powder coating process

Westin Automotive Products, Inc. manufactures automotive products. The Company distributes step and bull bars, running boards, grille guard, led lighting, winches, mounts, bumpers, truck bed, tool boxes, towing, floor and cargo liners, and body trim products.

• Protect vehicle from damage against wildlife and road debris.
• Heavy duty diamond plate steel
• Constructed of schedule 40 steel pipe
• Honeycomb mesh protects grille
• Built in 2" receiver hitch
• (2) Heavy duty 9,500 lbs bow shackle mounts
• Hardware and mounting brackets included
• Bolt-on installation - no drilling required

• Constructed of 11 gauge steel for strength and style
• Heavy duty diamond plate steel
• Unique "corner step" designs to provide an extra wide access step area
• Protects vehicle from damage against wildlife and road debris.
• Compatible for blind spot monitors and parking sensors
• Accomodate for OEM hitch
• Hardware, mounting brackets and two LED back up lights included
• Flush mount LED license plate lights included
• Bolt-on installation - no drilling required

• Made of 7 gauge steel
• Fits most medium frame 8,000-12,000 lbs winches up to 9 3/4" tall
• Fits remote solenoid winches only (will not fit integrated winches)
• Pre-drilled for winch and fairlead mounting
• Laser-cut openings to allow engine cooling
• Built to receive (2) 10" LED light bars
• Optional light bar and pre-runner bar sold seperately
• 1" thick HD shackle mounts
• Adjustable mounting brackets are located in the inset openings
• Designed to fit LED lights from 11" to 12 3/4" in height
• Available in textured black finish

• Made of  7 gauge steel
• 1-piece welded construction
• 1" thick HD shackle mounts
• (2) flush mount LED lights included
• License plate illumination lights included
• Laser-cut HDX Logo on ends
• Application specific designs
• Mounting brackets included
• Available with or without provision for back-up sensors for most applications
• Actual sensors not included
• Available in textured black

• Made of 14 gauge steel
• 2" diameter tube frame with 1 1/2" diameter center tubes
• Integrated bolt-on LED light mounts for two single or one double row 30" LED Bar
• Optional Outlaw Skid Plate available (sold separately)
• Optional round LED light kit with Westin auxiliary lights available (sold separately)
• Optional square LED light kit with Westin auxiliary lights available (sold separately)
• Mount kit included

• 2" diameter tube frame 
• Optional class III/IV hitch available (sold separately)
• Retractable license plate holder conceals receiver hitch
• Equipped with mount points for auxiliary lights
• Available for vehicles with or without backup sensors
• Bolt-on installation - no drilling required
• Mount kit included

• Made of 7 gauge steel
• Welded 2" tube stinger
• Aggressive chiseled design
• Fits most medium frame 8,000-12,000 lbs (up to 10.25" tall)
• .Pre-drilled for winch  and fairlead mounting
• 1" thick HD shackle mounts
• Mounting brackets mount directly to frame
• Textured black finish

*For Jeep Wrangler JK

• Made of 7 gauge steel
• Welded 2" tube stinger
• Aggressive chiseled design
• Fits most medium frame 8,000-12,000 lbs (up to 10.25" tall)
• .Pre-drilled for winch  and fairlead mounting
• 1" thick HD shackle mounts
• Mounting brackets mount directly to frame
• Textured black finish

*For Jeep Wrangler JK

• Made of 7 gauge steel
• 1-piece fully welded construction
• 1" thick HD shackle mounts
• (2) Flush mount LED lights included
• Welded hitch receiver
• Laser-cut Snyper logo on ends
• Brackets mount directly to frame
• Textured black finish

*For Jeep Wrangler JK

• Made of 2" diameter tube
• HD shackle mount tabs
• Angled light bar with light mounts tabs
• Utilizes Trailblazer Winch Tray Part No. 47-3106
• Contoured bumper provides off-road protection

*Front Jeep Wrangler JK & Gladiator

• Made of 2" diameter tube
• Includes 2" hitch receiver
• Designed for spare tire clearance
• Rated to 350 lbs tongue weight and 3,500 lbs trailer weight

 *Rear Jeep Wrangler YJ, TJ,  JK & Gladiator 

Whether you are escaping to the great outdoors or headed to the city, TrailFX® has the truck equipment and accessories to outfit your vehicle for any occasion. Quality, function, and innovation are key contributors which drive the development of all products under the TrailFX® brand. 

• Accommodates TrailFX 30 Inch Double Row Straight Light Bar And 3 Inch LED Flush Mount Cube Lights
• Compatible With OE Front Parking Sensors And Up To A 12,000 Pounds Winch Capacity
• Stylish And Functional Front End Protection
• Rugged, Fully Welded Design
• Easy Bolt-On Installation To Factory Mounting Points
• Limited 3 Year Warranty

• Stylish And Functional Rear End Protection
• Rugged, Fully Welded Design
• Accommodates TrailFX ® 3 Inch LED Flush Mount Lights
• Accommodates OE Rear Backup Sensor
• Easy Bolt-On Installation To Factory Mounting Points
• Limited 3 Year Warrant

• Tough And Durable
• Rugged, Fully Welded Design For Extra Strength
• Light Cut-Outs for 3" Cube Lights(Click Here) and 20" Single Row Light Bar(Click Here) (Sold Separately)
• Limited 3 Year Warranty

• Tough And Durable
• Rugged, Fully Welded Design For Extra Strength
• Limited 3 Year Warranty

• Grille Guard
• TFX HD Grille Guards
• Powder Coated
• Black
• Steel
• 2 Inch Diameter
• With Brush Guard
• Without Skid Plate
• Without Step Plate

Rugged Ridge develops and sells Jeep® parts accessories for the growing Jeep and off road enthusiast market. Rugged Ridge is a division of Omix, the market-leader for replacement and restoration Jeep parts. 

Product Details:

• 11 gauge stamped steel construction
• Adaptable function and style
• Strong light weight construction

Product Details:

• Heavy-duty front bumper adds style and versatility
• Includes factory fog light cut-outs
• Constructed from 4mm thick steel
• Comes in a textured black powdercoat finish
• Takes around 3 hours to complete installation
• Backed by Rugged Ridge's 5-year limited warranty

Product Details:

• Built from high-strength plate steel
• Rugged textured black powder coat finish
• Resists rust and corrosion
• Utilizes the factory JK fog lights for a finished look
• Works with all factory equipment including factory tow hitch

• Constructed from Muscular Stamped Steel
• Satin Black Powder-Coat Finish
• Octagonal Pockets Accept Factory Fog Lights (not included)
• Built-In Winch Plate Works with Most Aftermarket Winches
• All Required Mounting Hardware Included
• Installation Requires No-Drilling
• Integrated D-Ring Mounts
• 5-Year Limited Warranty

• Designed and built to withstand the conditions of severe off-road use
• High-strength 5mm-thick steel plate construction
• Massive 1-inch thick recovery shackle mounts (shackles not included)
• Integrated winch mounting plate
• Limited 5-Year Warranty

Warn Industries has the led the way in durable, innovative, and trusted off-road products since 1948.  Their powerful winches, rock-solid bumpers and mounting systems, versatile rigging equipment, and proven 4WD hubs let truck, Jeep, SUV, and powersports owners GO PREPARED for whatever lies ahead, whether on the trail or on the job. 

• Winch ready—accepts most WARN mid-frame (foot-down) winches up to 12,000 lbs. (5443 kg): ZEON and ZEON Platinum, 9.5cti, 9.5 xp, XD9000i, XD9000, M8000, and VR winches
• Bumper features integrated dual light ports to mount auxiliary flood or spot sights (lights not included)
• Welded recovery points, ready for D-shackles (sold separately)
• Bumper accommodates oversize tires
• Durable black textured powder coat over 11-gauge steel withstands rigorous salt spray testing, delivering up to 2X corrosion protection
• Easy to install—Pre-drilled bolt holes and cutouts make it easy to mount a WARN winch, even after bumper install

• Bumper features integrated light ports to mount auxiliary flood or spot sights (lights not included)
• Corner steps for easy access to truck bed and is parking sensor compatible
• Durable black textured powder coat over 11-gauge steel delivers maximum corrosion protection
• Laser-cut and CNC- formed for precise fit and durability
• Rear bumpers preserve park-assist sensors
• Not compatible with blind spot monitoring system

• Welded, one-piece construction uses heavy 1/4” and 3/16” thick steel
• Integrated winch mounting structure provides maximum strength. Rated for use with all WARN Heavyweight Series winches
• Bumpers available with or without tubular grille/brush guard
• Welded eyelets for D-shackles (shackles sold separately)
• Bumper design provides generous tire clearance and accommodates oversize tires
• Bumper features integrated light ports. Additional light mounting holes on top of the bumper
• Black powder-coat finish with undercoat delivers maximum durability

• Adds aggressive style and heavy-duty protection
• Sturdy 2" diameter x .120" wall tubing
• Compatible with all camera vision systems and sonar parking sensors
• Designed, tested, and manufactured in the USA

• Advanced Bumper geometry designed specifically to increase approach angles and articulation. Will accommodate 37" tires with only a 2" lift
• Precision welded eyelets for shackles, allowing for increased recovery options
• Recessed light buckets for OE fog lights or aftermarket lights
• Integrated winch mount is engineered and tested for the high stresses of winching. Fits ZEON, ZEON Platinum, VR, M8, XD9, XD9i, 9.0Rc, and 9.5xp winches. Will not fit WARN PowerPlant, 9.5cti, M8274-50, or M12, M15, or 16.5ti
• Integrated off-road jack points for easy access when jacking up a Jeep
• Optional integrated grille guard tube features a low-profile look. Bar is welded on and adds extra protection for both the vehicle and the WARN winch
• Lower bumper skid cover provides integrated look and protects critical components such as sway bar disconnects. Sold Separately.

• Maintains factory receiver
• Welded eyelets for shackles to increase your recovery options
• Optional tire carrier uses a chassis-mounted pivot and has a tailgate synchronized swing-out design. It can be easily opened with one hand, and takes the weight off of the tailgate
•  JL Bumper is rear parking, blind spot sensor compatible Also includes provision to relocate backup camera.

Please Note: This is a vehicle specific product and is designed to only fits a select number of years, makes and models. Please refer to the Fitment tab below to ensure this product fits your vehicle. 

• Narrow design for maximum tire clearance and approach angles
• Integrated winch mount is engineered and tested for the high stresses of winching. Fits ZEON, ZEON Platinum, VR, M8, XD9, XD9i, 9.0Rc, and 9.5xp winches. Will not fit WARN PowerPlant, 9.5cti, M8274-50, or M12, M15, or 16.5ti
• Precision welded eyelets for shackles, allowing for increased recovery options 
• Integrated jack points to accomodate hi-lift or other offroad jacks
• Optional integrated grille guard tube features a low-profile look. Bar is welded on and adds extra protection for both the vehicle and the WARN winch
• Lower bumper skid cover provides integrated look and protects critical components such as swaybar disconnects. Sold Separately

Also available for the Jeep JL & JT

• Tapered corners for increased approach angles
• Mid-frame winch mount (included) positions winch on top of bumper for easy use
• Accepts factory driving lights
• Available with or without welded-on grille guard tube
• Built-in tabs for off-road jacks
• State-of-the-art flat black powdercoated finish. Stands up to 408 hour salt spray testing and excellent UV protection
• Optional skid plate for further front-end protection
• One SKU for both JL, JK and JT models

• Strictly engineered and certified to withstand 12,000 lb pulls
• Positions winch to improve airflow and delivers ZERO INTERFERENCE with the grille
• Constructed with 1/4"-thick steel
• Easy to install with no cutting, grinding, or drilling
• Designed, tested, and manufactured in the USA

WARN bumpers are designed for double duty: protect your ATV or UTV and enhance its appearance. Made of laser cut steel and powder coated to resist corrosion, our bumpers provide extra defense against trail hazards and are contoured to give your rig a bold, customized look. Special cutouts on many ATV models can house WARN Trail Lights. They're also fully compatible with WARN winches, winch mounting systems, and plow systems